PrintCopy.info service

Konica-Minolta bizhub 751

Error Codes List page 1

  • Code: C-0101
  • Description: An error detection signal is detected in succession for a specified period of time after the paper feed motor (M1) is turned ON.
  • Causes: Paper feed motor (M1) Printer control board (PRCB)
  • Code: C-0102
  • Description: An error detection signal is detected in succession for a specified period of time after the LU paper feed motor (M101) is turned ON.
  • Causes: LU paper feed motor (M101) LU drive board (LUDB)
  • Code: C-0103
  • Description: An error detection signal is detected in succession for a specified period of time after the registration motor (M5) is turned ON.
  • Causes: Registration motor (M5) Printer control board (PRCB) ADU drive board (ADUDB)
  • Code: C-0202
  • Description: When the upper limit sensor /1 (PS2) is OFF, PS2 does not turn ON within a specified period of time after the paper lift motor /1 (M16) turns ON for its lifting operation.
  • Causes: Tray 1 Paper lift motor /1 (M16) Printer control board (PRCB) Upper limit sensor /1 (PS2)
  • Code: C-0204
  • Description: When the upper limit sensor /2 (PS8) is OFF, PS8 does not turn ON within a specified period of time after the paper lift motor /2 (M17) turns ON for its lifting operation.
  • Causes: Tray 2 Paper lift motor /2 (M17) Printer control board (PRCB) Upper limit sensor /2 (PS8)
  • Code: C-0206
  • Description: When the upper limit sensor /3 (PS14) is OFF, PS14 does not turn ON within a specified period of time after the paper lift motor / 3 (M18) turns ON for its lifting operation.
  • Causes: Tray 3 Paper lift motor /3 (M18) Printer control board (PRCB) Upper limit sensor /3 (PS14)
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Home
New Register Forgot Password?
Send message to us