PrintCopy.info service

Konica-Minolta bizhub 558e

Error Codes List page 2

 All About this machine
  • Code: 13-01, 13-40
  • Description: bizhub 368e/308e
    Misfeed at tray 3 feed section.
    13-01 The leading edge of the paper is not turned ON the tray 3 vertical transport sensor (PS113) even after the lapse of a given period of time after the tray 3 starts to feed paper.
    13-40 For paper fed from the tray 3, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output.
    - Paper jam of a sheet of paper left at the tray 3 feed section results, if the tray 3 vertical transport sensor (PS113) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
    - Paper jam of a sheet of paper left at the tray 3 feed section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
  • Causes: • Tray 3 paper feed motor (M111) • Tray 3 vertical transport motor (M112) • Tray 3 vertical transport sensor (PS113) • PC control board (PCCB)
  • Remedy: 1 Initial check items - - 2 PS113 I/O check, sensor check PCCB CN4-14 (ON) PC-115/PC-215 5-C 3 M111 load check • Check code: 28 • Multi code: 9, 10, 11, 12 PCCB CN5-1 to 8 PC-115/PC-215 4-C 4 M112 load check • Check code: 28 • Multi code: 17, 18, 19, 20 PCCB CN5-9 to 16 PC-115/PC-215 3 to 4-C 5 Replace PCCB.
  • Code: 13-01, 13-40
  • Description: bizhub 658e/558e/458e
    Misfeed at tray 3 feed section
    13-01 The leading edge of the paper is not turned ON the tray 3 vertical transport sensor (PS113) even after the lapse of a given period of time after the tray 3 starts to feed paper.
    13-40 For paper fed from the tray 3, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output.
    Paper jam of a sheet of paper left at the tray 3 feed section results, if the tray 3 vertical transport sensor (PS113) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
    - Paper jam of a sheet of paper left at the tray 3 feed section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
  • Causes: • Tray 3 paper feed motor (M111) • Tray 3 vertical transport motor (M112) • Tray 3 vertical transport sensor (PS113) • PC control board (PCCB)
  • Remedy: 1 Initial check items - - 2 PS113 I/O check, sensor check PCCB CN4-14 (ON) PC-115/PC-215 5-C 3 M111 load check • Check code: 28 • Multi code: 9, 10, 11, 12 PCCB CN5-1 to 8 PC-115/PC-215 4-C 4 M112 load check • Check code: 28 • Multi code: 17, 18, 19, 20 5 Replace PCCB.
  • Code: 14-01, 14-40
  • Description: bizhub 368e/308e
    Misfeed at tray 4 feed section
    14-01 The leading edge of the paper is not turned ON the tray 4 vertical transport sensor (PS123) even after the lapse of a given period of time after the tray 4 starts to feed paper.
    14-40 For paper fed from the tray 4, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output.
    - Paper jam of a sheet of paper left at the tray 4 feed section results, if the tray 4 vertical transport sensor (PS123) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
    - Paper jam of a sheet of paper left at the tray 4 feed section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
  • Causes: • Right door • Tray 4 • Tray 4 paper feed motor (M121) • Tray 4 vertical transport motor (M122) • Tray 4 vertical transport sensor (PS123) • PC control board (PCCB)
  • Remedy: 1 Initial check items - - 2 PS123 I/O check, sensor check PCCB CN18-5 (ON) PC-215 7-K 3 M121 load check • Check code: 28 • Multi code: 13, 14, 15, 16 PCCB CN9-1 to 8 PC-215 6-K 4 M122 load check • Check code: 28 • Multi code: 21, 22, 23, 24 PCCB CN9-9 to 16 PC-215 6-K 5 Replace PCCB.
  • Code: 14-01, 14-40
  • Description: bizhub 658e/558e/458e
    Misfeed at tray 4 feed section
    14-01 The leading edge of the paper is not turned ON the tray 4 vertical transport sensor (PS123) even after the lapse of a given period of time after the tray 4 starts to feed paper.
    14-40 For paper fed from the tray 4, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output.
    - Paper jam of a sheet of paper left at the tray 4 feed section results, if the tray 4 vertical transport sensor (PS123) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
    - Paper jam of a sheet of paper left at the tray 4 feed section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
  • Causes: • Tray 4 paper feed motor (M121) • Tray 4 vertical transport motor (M122) • Tray 4 vertical transport sensor (PS123) • PC control board (PCCB)
  • Remedy: 1 Initial check items - - 2 PS123 I/O check, sensor check PCCB CN18-5 (ON) PC-215 7-K 3 M121 load check • Check code: 28 • Multi code: 13, 14, 15, 16 PCCB CN9-1 to 8 PC-215 6-K 4 M122 load check • Check code: 28 • Multi code: 21, 22, 23, 24 PCCB CN9-9 to 16 PC-215 6-K 5 Replace PCCB.
  • Code: 15-01, 15-40
  • Description: bizhub 368e/308e
    Misfeed at external LCT paper feed section.
    15-01 The leading edge of the paper is not turned ON the LU paper feed sensor (PS3) even after the lapse of a given period of time after the external LCT starts to feed paper.
    15-40 For paper fed from the external LCT, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output.
    - Paper jam of a sheet of paper left at the external LCT feed section results, if the LU paper feed sensor (PS3) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
    - Paper jam of a sheet of paper left at the external LCT feed section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
  • Causes: • LU paper feed motor (M2) • LU paper feed sensor (PS3) • LU drive board (LUDB) • MFP board (MFPB) • PC control board (PCCB)
  • Remedy: 1 Initial check items - - 2 Make the pick-up roller load adjustment of the LCT. - - 3 PS3 I/O check, sensor check LUDB CN5-8 (ON) LU-302 4-G 4 M2 load check • Check code: 28 • Multi code: 33, 34, 35, 36 LUDB CN4-5 to 8 LU-302 3-G 5 Replace LUDB. - - 6 MFPB ICP10E conduction check - - 7 Replace MFPB. - - 8 Replace PCCB. (PC-115/PC-215 / PC-415)
  • Code: 15-01, 15-40
  • Description: bizhub 658e/558e/458e
    Misfeed at external LCT paper feed section
    15-01 The leading edge of the paper is not turned ON the LU paper feed sensor (PS3) even after the lapse of a given period of time after the external LCT starts to feed paper.
    15-40 For paper fed from the external LCT, the image write start signal permit continues to be disabled for a predetermined period of time after the timing of the image write start signal output.
    - Paper jam of a sheet of paper left at the external LCT feed section results, if the paper feed sensor (PS3) is turned ON when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
    - Paper jam of a sheet of paper left at the external LCT feed section results, if a sheet of paper is determined to exist at a position detected when the main power switch is turned ON, a door is opened and closed, or a misfeed or malfunction is reset.
  • Causes: • LU paper feed motor (M2) • LU paper feed sensor (PS3) • LU drive board (LUDB) • MFP board (MFPB) • PC control board (PCCB)
  • Remedy: 1 Initial check items - - 2 Make the pick-up roller load adjustment of the LCT. (LU-207 / LU-302) - - 3 PS3 I/O check, sensor check LUDB CN5-8 (ON) LU-207/LU-302 4-G 4 M2 load check LUDB CN4-5 to 8 LU-207/LU-302 3-G • Check code: 28 • Multi code: 33, 34, 35, 36 5 Replace LUDB. (LU-207 / LU-302) - - 6 Replace MFPB. - - 7 Replace PCCB. (PC-115/PC-215 / PC-415)
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us