Description: Debugging Service call for FW debugging
Causes: This error is intended to be used in the product development stage. It is supposed to not occur to marketed products, but may occur due to an unexpected cause such as external noises.
Remedy: Turn the power off and then turn it back on. Does the printer recover from the error? (No repair work is needed unless the error occurs again.) 1. Re-install the main firmware. 2. Replace the MAIN BOARD. 3. If not improved, escalate the case with the information in “Info1~Info3” displayed on the call window.
Code: Fxxx
Description: CPU related service call
Causes: There is something wrong with the firmware.
Remedy: Is the firmware installed correct one for the printer? Turn the power off and then turn it back on. Does the printer recover from the error? (No repair work is needed unless the error occurs again.) 1. Re-install the main firmware. 2. Replace the MAIN BOARD. 3. If not improved, escalate the case with the information in “Info1~Info3” displayed on the call window.
Code: S241
Description: Debugging Debugging error
Causes: The program's image process error
Remedy: Is there any problem such as damaged cable in the connection below? • MAIN BOARD to SUB BOARD (CN100) Replace the SUB BOARD.