-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Epson Stylus Pro 4910
Error Codes List page 24
|
|
|
- Code: 2003
- Description: FLASH BOOT SUM CHECK error
- Causes: 1. Installation of the firmware has been failed. 2. The Flash ROM is damaged.
- Remedy: 1. Re-install the firmware. 2. Replace the Main Board.
- Code: 200A
- Description: F/W load error
- Causes: Reading/decompressing the firmware has been failed.
- Remedy: 1. Re-install the firmware. 2. Replace the Main Board.
- Code: 200D
- Description: System interrupt watchdog time-out error
- Causes: A system failure such as CPU failure, defective cash or the like has occurred.
- Remedy: Replace the Main Board.
- Code: 3000
- Description: AC shut-off
- Causes: The AC power has been shut off due to a power failure, unplugged, Power Supply Board failure, or Main Board failure or the like.
- Remedy: 1. Replace the Power Supply Board. 2. Replace the Main Board.
- Code: Dxxy
- Description: Service call for FW debugging
- Causes: This is an error for debugging in the design stage. However, it may occur due to unexpected reasons such as external noises.
- Remedy: 1. Re-install the firmware. 2. Replace the Main Board.
- Code: Fxxx
- Description: CPU related service call
- Causes: • The firmware has a defect. • The Main Board is broken.
- Remedy: 1. Re-install the firmware. 2. Replace the Main Board.