Epson PM300

• Code: 01
• Display: PicturePack low. Replace PicturePack before running <Auto Cleaning>.
• Description: Head Cleaning can not
• Causes: When it execute the head cleaning at ink low time or Near Waste over.
• Remedy: 1. Check the ink level displayed on the LCD. 1. Replace the Ink Cartridge with a new one.

• Code: 02
• Display: Replace picturePack now. For best results, use a genuine PictureMate PicturePack. T58XX*
• Description: Ink Out Error
• Causes: Ink end has occurred. (cover is closed)
• Remedy: 1. Check the ink level displayed on the LCD. 1. Replace the Ink Cartridge with a new one.

• Code: 03
• Display: Replace picturePack now. For best results, use a genuine PictureMate PicturePack.
• Description: Photo cartridge internal pad overflow
• Causes: When the absorption of the waste fluid pad reached marginality.
• Remedy: 1. Check the ink level displayed on the LCD. 1. Replace the Ink Cartridge with a new one.

• Code: 04
• Display: PicturePack low. Replace PicturePack soon. T58XX*
• Description: Ink Low Print Pack Low
• Causes: When Print Pack Status becomes.
• Remedy: 1. Check the ink level displayed on the LCD. 1. Replace the Ink Cartridge with a new one.

• Code: 05
• Display: Photo cartridge not installed. Open cartridge cover, then insert cartridge.
• Description: Photo cartridge Out
• Causes: When the cover is closed without photo cartridge.
• Remedy: Ink Cartridge 1. Check if the Ink Cartridge is correctly installed. 1. Install the Ink Cartridge correctly. 2. Check the memory chip on the cartridge for chipping or any other damage. 2. Replace the Ink Cartridge with a new one. Cartridge Assy 1. Check if the tension spring 1.46 is disengaged. 1. Attach the tension spring 1.46 to the tabs. 2. Check the CSIC Board for damage. 2. Replace the Cartridge Assy with a new one.

• Code: 06
• Display: Photo cartridge not recognized. For best results, use a genuine PictureMate PicturePack.
• Description: Wrong Photo cartridge
• Causes: When the wrong photo cartridge is detected.
• Remedy: Ink Cartridge 1. Check if the Ink Cartridge is correctly installed. 1. Install the Ink Cartridge correctly. 2. Check the memory chip on the cartridge for chipping or any other damage. 2. Replace the Ink Cartridge with a new one. Cartridge Assy 1. Check if the tension spring 1.46 is disengaged. 1. Attach the tension spring 1.46 to the tabs. 2. Check the CSIC Board for damage. 2. Replace the Cartridge Assy with a new one.