Epson AcuLaser M2000
Error Codes List page 2
|
|
- Code: E010
- Image:
- Description: Fuser thermistor short-circuit
The A/D value input from the fuser thermistor is “0” (zero). - Causes: Poor connection of the fuser thermistor. The fuser thermistor has breaks. Mounting failure of the fuser thermistor. Fuser thermal cut-out has been activated. Mounting failure of the fuser heater lamp. The fuser heater lamp has breaks.
- Code: E011
- Image:
- Description: Zero cross signal error
The Main Board Assy. did not receive the zero cross signal during a specified time period. - Causes: Poor connection between the HVPS (YC202) and the Main Board Assy. (YC811). Poor connection between the LVPS (YC103) and the HVPS (YC201). The LVPS is faulty. The Main Board Assy. is faulty.
- Code: E016
- Image:
- Description: Option cassette unit communication error
The communication between the Main Board Assy. and the PF main board of the option cassette unit cannot be established. - Causes: Mounting failure of the option cassette unit. Poor connection between the Main Board Assy. (YC818) and the PF interface connector. The Main Board Assy. is faulty. Poor connection between the PF main board (YC5) and the PF interface connector. The PF main board is faulty.
- Code: E998
- Image:
- Description: Engine communication error
Communication error between the controller on the Main Board Assy. and the engine controller. - Causes: The firmware of the engine controller is faulty. The Main Board Assy. is faulty.