Description: - Standard tray shift motor or finisher controller PCB failure
- Standard tray HP sensor failure - Standard tray clock sensor failure
- Standard tray shift motor load failure The encoder clock signal was not detected two or more times when the standard tray was operated for 300 ms.
Remedy: - Check the connector of the standard tray HP sensor. - Check the connector of the standard tray clock sensor. - Check the connector of the standard tray shift motor. - Replace the standard tray HP sensor. - Replace the standard tray clock sensor. - Replace the standard tray shift motor. - Replace the finisher controller PCB.
Code: E542-0001
Description: - Optional tray motor or finisher controller PCB failure
- Optional tray HP sensor failure - Optional tray clock sensor failure
- Optional tray shift motor load failure The optional tray was operated, but the paper surface was not detected.
Remedy: - Check the connector of the optional tray HP sensor. - Check the connector of the optional tray clock sensor. - Check the connector of the optional tray shift motor. - Replace the optional tray HP sensor. - Replace the optional tray clock sensor. - Replace the optional tray shift motor. - Replace the finisher controller PCB.
Code: E542-0002
Description: - Optional tray motor or finisher controller PCB failure
- Optional tray HP sensor failure - Optional tray clock sensor failure - Optional tray shift motor load failure Cannot move (to the pickup position) within the specified time.
Remedy: - Check the connector of the optional tray HP sensor. - Check the connector of the optional tray clock sensor. - Check the connector of the optional tray shift motor. - Replace the optional tray HP sensor. - Replace the optional tray clock sensor. - Replace the optional tray shift motor. - Replace the finisher controller PCB.
Code: E542-0003
Description: - Optional tray motor or finisher controller PCB failure
- Optional tray HP sensor failure - Optional tray clock sensor failure - Optional tray shift motor load failure The optional tray was moved upward, but it did not reach the HP sensor within 3000 ms.
Remedy: - Check the connector of the optional tray HP sensor. - Check the connector of the optional tray clock sensor. - Check the connector of the optional tray shift motor. - Replace the optional tray HP sensor. - Replace the optional tray clock sensor. - Replace the optional tray shift motor. - Replace the finisher controller PCB.
Code: E542-0005
Description: - Optional tray motor or finisher controller PCB failure
- Optional tray HP sensor failure - Optional tray clock sensor failure - Optional tray shift motor load failure The encoder clock signal was not detected two or more times when the optional tray was operated for 300 ms.
Remedy: - Check the connector of the optional tray HP sensor. - Check the connector of the optional tray clock sensor. - Check the connector of the optional tray shift motor. - Replace the optional tray HP sensor. - Replace the optional tray clock sensor. - Replace the optional tray shift motor. - Replace the finisher controller PCB.
Code: E575-0001
Description: - Stack delivery motor or finisher controller PCB failure
- Stack delivery HP sensor failure The stack delivery motor was driven for 2000 ms in the stack delivery direction (HP sensor approach direction), but the stack delivery HP sensor did not turn on.
Remedy: - Check the connector of the stack delivery HP sensor. - Check the connector of the stack delivery motor. - Check the connector of the stack delivery HP sensor. - Replace the stack delivery motor. - Replace the finisher controller PCB.