PrintCopy.info service

Canon iR Advance 4045i

Error Codes List page 41

  • Code: E840-0001
  • Description: Failure of Fixing Film Edge Cooling Fan (Rear) (FM1)
    When the lock signal is detected for 15 sec while the fixing film edge cooling fan (rear) stops. * The same status is detected again after the retry operation.
  • Remedy: 1. Check connection of the Connectors (J2036/J215). 2. Replace the fixing film edge cooling fan (rear) (FM1) 3. Replace the DC controller PCB (UN2).
  • Code: E840-0002
  • Description: Rotation error of Fixing Film Edge Cooling Fan (Rear) (FM1)
    When the lock signal is detected for 15 sec while the fixing film cooling fan (rear) operates. * The same status is detected again after the retry operation.
  • Remedy: 1. Check connection of the Connectors (J2036/J215). 2. Replace the fixing film edge cooling fan (rear) (FM1) 3. Replace the DC controller PCB (UN2).
  • Code: E840-0003
  • Description: Failure of Fixing Film Edge Cooling Fan (Front) (FM2)
    When the lock signal is detected for 15 sec while the fixing film edge cooling fan (front) stops. * The same status is detected again after the retry operation.
  • Remedy: 1. Check connection of the Connectors (J2035/J215). 2. Replace the fixing film edge Cooling fan (front) (FM2) 3. Replace the DC controller PCB (UN2).
  • Code: E840-0004
  • Description: Rotation error of Fixing Film Edge Cooling Fan (Front) (FM2)
    When the lock signal is detected for 15 sec while the fixing film edge cooling fan (front) operates. * The same status is detected again after the retry operation.
  • Remedy: 1. Check connection of the Connectors (J2035/J215). 2. Replace the fixing film edge cooling fan (front) (FM2). 3. Replace the DC controller PCB (UN2).
  • Code: E880-0001
  • Description: Controller Cooling Fan error
    The failure of the controller cooling fan (FM12) is detected.
  • Remedy: 1. Check the connector (J1015). 2. Replace the controller cooling fan (FM12). 3. Replace the main controller PCB 1 (UN25).
  • Code: E880-0005
  • Description: Controller Cooling Fan error
    1. Check the connector (J1015). 2. Replace the controller cooling fan (FM12). 3. Replace the main controller PCB 1 (UN25).
  • Remedy: Controller Cooling Fan (FM12) is detected.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us