-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Canon Satera MF6880dw
Error Codes List page 5
|
|
|
- Code: E766 xxxx*1
- Description: Firmware error
- Causes: An error due to the controller software occurred so that print could not be proceeded. *1 Task number related to Exception is shown in decimal
- Remedy: Due to firmware error, the possibility of solving the error by replacing the Main Controller PCB is low. Check the installed engine again.
- Code: E804 0004
- Description: Controller Fan error
- Causes: Since the startup of the Controller Fan, the Fan was locked for a specified consecutive period of time.
- Remedy: 1. Check power supply to the Controller Fan. 2. Replace the Controller Fan.
- Code: E805 0000
- Description: Main Fan error
- Causes: The Main Fan was locked for a specified consecutive period of time.
- Remedy: 1. Check the connection of the Main Fan. 2. Replace the Main Fan.
- Code: E808 0000
- Description: Failure detection of Low Voltage Power Supply PCB
- Causes: Printer detected failure of the Low Voltage Power Supply PCB.
- Remedy: Replace the Engine Controller PCB.