Description: The error detection circuit on the waste toner feed motor driver PCB has detected on overcurrent.
Code: E203
Description: Input of two or more clock pulses is not received within 2 sec from the scanner motor drive signal is generated.
Code: E210
Description: The lens home position signal (LHP) is not generated within 4.8 sec after the power switch or door switch has gone ON. The lens home position signal (LHP) is generate 2 sec or more.
Code: E240
Description: An error has occurred in the microprocessor on the DC controller PCB.
Code: E243
Description: An error has occurred in the communication between the microprocessor of the DC controller PCB and the microprocessor in the control panel.
Code: E710
Description: An error has occurred in the communication between the DC controller PCB and the controller PCB of the option, and the DC controller has detected the error.