Description: The thermistor has an open circuit or a short circuit.
The heater has an open circuit.
The thermal fuse has blown.
The High-voltage power supply board has a fault.
The DCNT board has a fault.
Remedy: - Check the connector of the fixing film unit.
- Replace the fixing film unit.
- Replace the High-voltage power supply board.
- Replace the DCNT board.
Code: E100
Description: The scanner assembly has a fault.
Remedy: - Check the connector of the laser scanner assembly.
- Replace the laser scanner assembly.
- Replace the engine controller PCB.
Code: E198
Description: Flash ROM write error.
Remedy: - Turn the power OFF and then back ON.
- Replace the SCNT board.
Code: E225
Description: CIS lamp has a fault.
Remedy: - Turn the power OFF and then back ON.
- Replase the CIS unit.
Code: E674
Description: Modem error.
Remedy: - Turn the power OFF and then back ON.
- Replace the SCNT board.