Description: An error occurred during access to the DRAM in the main PCB.
Remedy: 1 Main PCB failure Replace the main PCB.
Code: E600
Description: Write error in the EEPROM of the main PCB
Remedy: 1 Main PCB failure Replace the main PCB.
Code: E701
Description: System error in the flash ROM
Remedy: 1 Main PCB failure Replace the main PCB.
Code: E702
Description: Read error in the flash ROM
Remedy: 1 Main PCB failure Replace the main PCB.
Code: E900
Description: An error occurred while initializing the NFC.
Remedy: 1 Connection failure of the NFC flat cable Reconnect the NFC flat cable. 2 NFC PCB failure Replace the NFC PCB. 3 Main PCB failure Replace the main PCB.
Code: EC00
Description: Overcurrent was caused because a USB device that did not meet the specifications was inserted into the USB port.
Remedy: <User Check> • Disconnect the USB device from the USB flash memory port and turn the machine OFF. Turn the machine ON again after a while. • Replace the USB device with a different one. 1 USB host PCB failure Replace the USB host PCB. 2 Main PCB failure Replace the main PCB.