Riso KZ30

Error Code:

Code: P03
Description: Clamp motor lock
Causes: 500 Clamp sensor is OFF after the completion of the clamp unit initialization or home positioning movement. 501 Clamp sensor does not go OFF within 1 second from the time the clamp motor operates. 502 Clamp sensor does not go ON within 2.5 seconds from the time the clamp motor operates. 504 At the start of Clamp plate open action, the detection of clamp sensors is OFF. 505 At the start of print drum Position-A compensation movement, the detection of clamp@sensor is OFF. 506 At the start of Clamp unit Home-positioning movement, the detection of clamp sensor is ON. 507 Clamp sensor is OFF after the clamp open action is completed. 508 Clamp sensor is ON after the Position-A compensating movement is completed.
Remedy: Press Reset Key

	Error Code
	Service Mode, Troubleshooting
	Parts Catalog
	Compatibility
	Downloads Files
	Home