Xerox Phaser 6180

• Code: 016-220
• Description: Incorrect PagePack Password Flash error has occurred. The following troubleshooting procedure applies to this error.
• Causes: • Image Processor Board, PL9.1.20
• Remedy: 1 1. Check the password. 2. Did the user enter the correct password for PagePack? Go to step 2. Re-enter the correct password for PagePack. 2 Does the error still occur when the printer is turned On? Replace the Image Processor Board. Complete.

• Code: 016-500, 016-501, 016-502
• Description: Flash Error Flash error has occurred. The following troubleshooting procedure applies to these errors. • Chain Link 016-500: Erase Flash Error (Download Delete Error) • Chain Link 016-501: Write Flash Error (Download Write Error) • Chain Link 016-502: Write Flash Error (Download Verify Error)
• Causes: • Image Processor Board, PL9.1.20
• Remedy: 1 1. Check the Image Processor Board for correct installation. Reseat the Image Processor Board. 2. Does the error still occur when the printer is turned On? Replace the Image Processor Board. Complete.

• Code: 016-610
• Description: Control Panel Language Set Unsupported The Control Panel does not support the language. The following troubleshooting procedure applies to this error.
• Causes: • MCU Board, PL9.2.13
• Remedy: 1 1. Turn the printer power Off and back On. 2. Does the error still occur? Replace the MCU Board. Complete.

• Code: 016-611
• Description: Engine Model Mismatch Printer Engine model does not match. The following troubleshooting procedure applies to this error.
• Causes: • MCU Board, PL9.2.13
• Remedy: 1 1. Turn the printer power Off and back On. 2. Does the error still occur? Replace the MCU Board. Complete.

• Code: 016-718, 016-982
• Description: Out of Memory/Hard Drive Full The printer memory is full and cannot continue to print. Print job requires additional memory. The following troubleshooting procedure applies to these errors. • Chain Link 016-718: Out of memory • Chain Link 016-982: Hard Drive Full (Disk Full)
• Causes: • Image Processor Board, PL9.1.20 • Memory Card (Option), PL9.1.22
• Remedy: 1 1. Check the required memory for the print job. 2. Print a small size file (example as a Windows test print). 3. Does the error still occur? Go to step 2. Add memory card or separate the print job. 2 1. Reseat the memory card. 2. Does the error still occur? Go to step 3. Complete. 3 1. Check the memory card capacity. Print the printer Configuration Page: System > Information Pages > Configuration. 2.Does the memory meet the print job requirements? Go to step 4. Replace the Image Processor Board. 4 1. Replace the memory card. 2. Does the error still occur? Replace the Image Processor Board. Complete.

• Code: 016-720
• Description: PDL Error PDL Error has occurred. The following troubleshooting procedure applies to this error.
• Causes: • Image Processor Board, PL9.1.20
• Remedy: 1 Check the print job. 1. Print a small print job (example as a Windows test print). 2. Does the error still occur? Go to step 2. Complete. 2 1. Reseat the Image Processor Board. 2. Does the error still occur? Replace the Image Processor Board. Complete.