Description: Trans Life Over 094-351 The Transfer Belt has reached end of life.
Causes: • Left Side Harness, PL3.1.18 • Transfer Belt, PL6.1.7 • MCU Board, PL8.2.13
Remedy: 1 Check the Transfer belt life counter. Has the counter reached end of life? Replace the Transfer Belt. Go to step 2. 2 Check the Transfer Belt installation. Is the Transfer Belt correctly installed? Go to step 3. Reseat the Transfer Belt. Go to step 2. 3 Does the error still occur when the printer is turned On? Go to step 4. Complete. 4 Check connectors P/J28 and P/J281 between the MCU Board and Transfer Belt. Are the connectors secure? Go to step 5. Reconnect the connectors. 5 Check Left Side Harness continuity. Disconnect P/J28 from the MCU Board and P/J281 to the Transfer Belt. Is the harness damaged? Repair or replace the harness. Go to step 6. 6 Replace the Transfer Belt. Does the error persist? Replace the MCU Board. Complete.
Remedy: 1 Check the Image Processor Board installation. Is the Image Processor Board correctly installed? Go to step 2. Reseat connections on the IP Board. 2 Does the error still occur when the printer is turned On? Replace the Image Processor Board. Complete.
Remedy: 1 Check the Memory Card installation. Is the Memory Card correctly installed? Go to step 2. Reseat the Memory Card. 2 Replace the Memory Card. Does the error persist? Replace the Image Processor Board. Complete
Code: 116-721
Description: Collate Full 116-721 Memory is full and cannot receive additional data. Print job requires additional memory. Note Optional memory is required to configure the Collate function.
Remedy: 1 Reduce the RAM Disk size setting to allow space for collation. Does the error persist? Go to step 2. Complete. 2 Print the Configuration Page: System > Information Pages > Configuration. Does the memory amount listed match the installed memory? Go to Step 3. Reseat the Memory Card and reprint the Configuration page to check memory. 3 Partition the print job. Does the error still occur? Replace the Image Processor Board. Complete.