Xerox Phaser 6128 MFP
Error Codes List page 9
|
|
- Code: 117-365
- Description: Memory Errors A memory access error occurred. This troubleshooting procedure applies to these errors. 117-365: Verify Flash Error
- Causes: • Image Processor Board, PL10.6.6
- Remedy: 1 Check the Image Processor Board for correct installation. Is the Image Processor Board correctly installed? Go to step 2. Reseat connections on the Image Processor Board. 2 Does the error still occur when the printer is turned On? Replace the Image Processor Board. Complete.
- Code: 123-314
- Description: Control Panel Error The Control Panel has failed. The following troubleshooting procedure applies to this error.
- Causes: • Control Panel, PL10.2.2 • Image Processor Board, PL10.6.6 • A-OP-ESS Harness, PL10.8.12
- Remedy: 1 Check the Control Panel connections. Is P/J202 on the Control Panel and P/J5301 secure? Go to Step 2. Secure the connection. 2 Check the A-OP-ESS harness continuity. Disconnect P/J202 from the Control panel and P5301. Is the harness damaged? Repair or replace the harness (PL10.8.12). Go to step 3. 3 Check for +5 V at J403 of the I/P Board. Is there +5 V between ground <=> J403-4 on the MCU Board when the Interlock Switch is closed? Replace the Control Panel. Replace the I/P Board.
- Code: 131-397
- Description: Memory Errors A memory access error occurred. This troubleshooting procedure applies to these errors. 131-397: Verify Flash Error
- Causes: • Image Processor Board, PL10.6.6
- Remedy: 1 Check the Image Processor Board for correct installation. Is the Image Processor Board correctly installed? Go to step 2. Reseat connections on the Image Processor Board. 2 Does the error still occur when the printer is turned On? Replace the Image Processor Board. Complete.