-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Sharp MXM315U
Error Codes List page 1
|
|
- Code: A0-01
- Description: PCU PWB ROM error
- Causes: The firmware version-up is not completed properly by interruption of the power during the version-up operation, etc. PCU PWB trouble.
- Remedy: Use SIM49-1 to perform the firmware version-up procedure again. Replace the PCU PWB.
- Code: A0-02
- Description: SCU PWB ROM error
- Causes: The firmware version-up is not completed properly by interruption of the power during the version-up operation, etc. SCU PWB trouble.
- Remedy: Use SIM49-1 to perform the firmware version-up procedure again. Replace the SCU PWB.
- Code: A0-11
- Description: Firmware version inconsistency (MFP - PCU)
- Causes: Firmware combination error between the MFP and the PCU.
- Remedy: Install the firmware in the all-firmware version-up mode.
- Code: A0-15
- Description: Incompatible DSK BOOT and program firmware
- Causes: Installation of the normal firmware was performed with a security kit enable.
- Remedy: Stop installation of the normal firmware.
- Code: A0-20
- Description: Conflict firmware and EEPROM data version (MFP)
- Causes: Inconsistency between the MFP firmware version and the EEPROM data version.
- Remedy: Check the combination of the firmware.
- Code: A0-21
- Description: Conflict firmware and EEPROM data version (PCU)
- Causes: Inconsistency between the PCU firmware version and the EEPROM data version.
- Remedy: Check the combination of the firmware.