Causes: Comparison of machine serial number (11 digits) and machine identification code. Details: • Machine serial number cannot be identified because of BICU replacement or malfunctioning. • Machine serial number cannot be identified because of NV-RAM replacement. Machine serial number (11 digits) or machine identification code does not match.
Remedy: • Replace the board(s) to match the CPM of the controller and BICU boards. • Turn the main power switch off and on.
Code: SC997-00
Description: Application function selection error
Causes: • The application has not responded to the set command created by SCS within a certain period of time. • The application selected ended abnormally. Software bug
Remedy: • Check whether an option required by the application (RAM, DIMM, board) is installed properly. • Check whether downloaded applications are correctly configured. (Take necessary countermeasures specific to the application in which the error occurs. In some applications, the logs can be taken from the monitor. If this option is available, analyze the logs.)
Code: SC998-00
Description: Application start error
Causes: • After power on, no application program is registered to the system within a predetermined period of time. (No application starts or ends normally.) • Even if they are started, all applications have become unable to be rendered due to an unknown defect. • Software bug • An option required by the application (RAM, DIMM, board) is not installed properly
Remedy: • Turn the main power switch off and on. • Check whether an option required by the application (RAM, DIMM, board) is installed properly. • Check whether downloaded applications are correctly configured. • Replace the Controller Board.