Description: CPM setting error 3 Comparison of machine serial number (11 digits) and machine identification code. Details: Unable to recognize machine identification code because the controller was replaced incorrectly or is malfunctioning.
Causes: Machine serial number (11 digits) or machine identification code does not match.
Remedy: Replace it with the correct type of controller.
Code: SC995-04
Description: CPM setting error 4 Comparison of machine serial number (11 digits) and machine identification code.
Causes: Machine serial number (11 digits) or machine identification code does not match.
Remedy: Return the parts to the original configuration, and then replace them according to the manual
Code: SC997-00
Description: Application function selection error • No response to the predetermined command from SCS to the same application program 4 times consecutively. Cases when SC997-00 occur; 1. SCS sends a command to the copy application. 2. There has been no response from the copy application for 30 sec. (Error count value: 1) 3. Step1-2 is repeatedly performed 3 times. (Error count value: 4) 4. SC997-00 occur. Cases when SC997-00 does not occur; 1. SCS sends a command to the copy application. 2. There has been no response from the copy application for 30 sec. (Error count value: 1) Step1-2 is repeatedly performed 2 times. (Error count value: 4) 3. SCS sends a command to the copy application. There has been a response from the copy application. (Error count value: 1) • The application ended by an unusual process
Causes: A software bug (mainly the application)
Remedy: • Check the optional RAM/DIMM/boards required by the application program. • Check if the combination of downloaded programs is correct.
Code: SC998-00
Description: Application start error • No application was registered to the system within a specified time after the main power was turned ON. (No application starts/All applications have been terminated abnormally) • The application started but cannot be drawn now for some reason.
Causes: • A software bug (mainly the application) • The optional RAM/DIMM/boards, required by the application program, are not installed correctly.
Remedy: • Check the optional RAM/DIMM/boards required by the application program. • Check if the combination of downloaded programs is correct. • Replace the controller board (PCB15).