PrintCopy.info service

Ricoh D181 Pro 8120 BR-C1

Error Codes List page 2

  • Code: SC141-00
  • Description: Black level adjustment error
  • Causes: The black level did not reach the prescribed level after AGC (Automatic Gain Control) adjustment done immediately after power on, or when leaving lower power mode.
  • Remedy: • SBU defective • IPU defective • Power line, signal harness defective
  • Code: SC142-00
  • Description: White level detection error
  • Causes: The white level did not reach the prescribed level after AGC (Automatic Gain Control) adjustment done immediately after power on, or when leaving lower power mode.
  • Remedy: • LED defective • LED driver defective • SBU defective • IPU defective • Power line, signal harness defective • Condensation in scanner unit • Mirror, lens defective. • White plate missing or not installed correctly, plate defective, plate dirty
  • Code: SC144-00
  • Description: SBU Communication Error
  • Causes: When the machine was switched on, or when the machine returned to full operation from the low power mode, the machine could not access the SBU register, or the SBU register values were abnormal.
  • Remedy: • SBU-BCU harness loose, disconnected, defective • SBU defective • Harness defective
  • Code: SC161-01
  • Description: IPU Error (LSYNC defective)
  • Causes: At power on, or when the machine recovered from low power mode, the IPU executed self-diagnostics and detected an error (LSYNC).
  • Remedy: • Harness between SBU and IPU loose, broken, defective • IPU defective
  • Code: SC161-02
  • Description: IPU Error (Ri response error)
  • Causes: An IPU error occurred when Ri was accessed.
  • Remedy: • IPU (BCU, Controller) defective
  • Code: SC165-00
  • Description: Copy data security card error
  • Causes: The optional copy data security card (also called “ICIB”) was not installed, even though the illegal copy function setting was done at initialization, or the ICIB was judged defective, the ICIB was judged defective when the machine was powered on or returned from low power mode. Note: This is the SD card that holds the firmware for the prohibit copy function that stops copying of currency, bank bonds, etc.
  • Remedy: • ICIB not installed • ICIB not installed correctly
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us