PrintCopy.info service

Ricoh D181 Pro 8120 BR-C1

Error Codes List page 128

 All About this machine
  • Code: SC990-00
  • Description: Software error 1
  • Causes: An unexpected operation was encountered by the software.
  • Remedy: • Software crash, reboot the machine • If the HDDs have just been replaced, be sure to download the stamp data (SP 5853). • With SP5990 004(SMC Report – Logging Data), print the most recent information for SC990. • The SC990 information displays the file name, line number, and value. Report this information to your technical supervisor. For example: Function.c LINE: 123 VAL: 0
  • Code: SC991-00
  • Description: Software Error 2
  • Causes: The software peformed an unexpected function and the program cannot continue. Recovery processing allows the program to continue.
  • Remedy: • Abnormal variable • Internal parameter error • Insufficient work memory • Hardware error not detected by SC
    In order to get more details about SC991: 1. Execute SP7403 or print an SMC Report (SP5990) to read the history of the 10 most recent logged errors. 2. If you press the zero key on the operation panel with the SP selection menu displayed, you will see detailed information about the recently logged SC991, including the software file name, line number, and so on. Of these two methods, 1) is the recommended method, because another SC could write over the information for the previous SC.
  • Code: SC992-00
  • Description: Undefined Error (No SC Code)
  • Causes: An error not controlled by the system occurred (the error does not come under any other SC code).
  • Remedy: • Software defective • Incorrect SC code from previous machine
  • Code: SC995
  • Description: CPM setting error
  • Causes: The 11-digit machine code information and the manufacturer code were compared.
  • Remedy: • The machine code and manufacturer codes do not match.
  • Code: SC997-00
  • Description: Application selection error 1
  • Causes: An application did not start after pressing the appropriate key on the operation panel.
  • Remedy: • Software bug
  • Code: SC998-00
  • Description: Application selection error 2
  • Causes: Register processing did not execute for an application within 60 sec. after the machine was switched on. No applications start correctly, and all end abnormally.
  • Remedy: • Software bug • A RAM or DIMM option required by the application is not installed or not installed correctly.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us