OKI LE810

• Code: 01
• Display: MACHINE ERROR
• Description: 01 Machine
• Remedy: 1. Ensure all wiring harnesses are properly connected. 2. Replace main circuit board

• Code: 02
• Display: EEPROM ERROR
• Description: 02 Flash ROM
• Remedy: 1. Ensure correct communication protocols. 2. Check cables, cycle printer power and resend. 3. Replace board.

• Code: 03
• Display: PARITY ERROR
• Description: 03 Parity
• Remedy: 1. Ensure correct communication parameters. 2. Check cables, cycle printer and resend. 3. Replace board.

• Code: 04
• Display: OVERRUN ERROR
• Description: 04 Overrun
• Remedy: 1. Check and correct communication cables and settings. 2. Reboot printer and try again.

• Code: 05
• Display: FRAMING ERROR
• Description: 05 Framing
• Remedy: 1. Ensure host system and interface settings match. 2. Check and correct communication cables (null modem serial cable required).

• Code: 06
• Display: BUFFER OVER
• Description: 06 Buffer Overflow
• Remedy: 1. Size of received data exceeds size of receiving buffer. 2. Establish the correct communication protocol.