-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
OKI C5650
Error Codes List page 11
|
|
- Code: 918
- Display: Power off/on 918:Error
- Description: Duplex FAN Alarm Detection
- Causes: FAN error inside the Duplex. Is the error issued again when the power is turned on again?
- Remedy: Check to see if the Duplex is properly installed. Check to see if the FAN is properly connected. Replace the FAN.
- Code: 923
- Display: Power off/on 923:Error
- Description: Black Image Drum Lock Error
- Causes: The black image drum (K-ID) does not rotate properly. Is the error message issued again when the power is turned on?
- Remedy: Check to see if the K-ID is properly installed. Replace the K-ID. Replace the K-ID motor.
- Code: 928
- Display: Power off/on 928:Error
- Description: Fuser MotorLock Error
- Causes: The fuser unit does not rotate properly. Does the error reoccur after power cycling?
- Remedy: Check to see if the fuser unit is properly installed. Replace the fuser unit. Replace the fuser motor.
- Code: 980
- Display: Service call 980:Error
- Description: Error by media clinging to the fuser
- Causes: Media has clung to the fuser.
- Remedy: Power OFF Replace the fuser unit.
- Code: F0C, F0D, FFF
- Display: Power off/on 203:Error 204:Error 207:Error 208:Error 214:Error F0C:Error F0D:Error FFF:Error
- Description: An error was detected of the CU program. (203~214 is not occure in usual operating.)
- Causes: Reinstall the CU PCB. Is the error message displayed again?
- Remedy: After turn power OFF, check connections between CU PCB and PU PCB. Then turn power ON again.