Display: ACTION NOT CURRENTLY AVAILABLE FOR TRAY X TRAY SIZE CANNOT BE ANY SIZE/ANY CUSTOM
Description: A duplexed (2-sided) document was requested from a tray that is set to Any Size or Any Custom. Duplexing is not allowed from a tray configured to Any Size or Any Custom.
Remedy: Select another tray or reconfigure the tray.
Code: -
Display: Authentication required
Description: Authentication has been enabled for this feature or destination. A username and password are required.
Remedy: Type the user name and password, or contact the network administrator.
Code: -
Display: Authentication required to use this feature
Description: A user name and password are required.
Remedy: Type the user name and password, or contact the network administrator.
Code: -
Display: Bad Duplexer Connection
Description: The duplex-printing accessory is not connected correctly to the MFP.
Remedy: 1. Remove and reinstall the duplexer. 2. If this message persists, the connector between the duplexer and the engine might be damaged. Inspect the connector, J151L, on the duplexer. If the connector is damaged, replace the duplexer. 3. If the message still persists, replace the DC controller.
Code: -
Display: Bad Envelope Feeder Connection - To Continue Turn Off Then On
Description: The envelope feeder is not connected properly.
Remedy: Remove and reinstall the envelope feeder.
Code: -
Display: Check the glass and remove any paper, then press START
Description: A digital send or copy job has been performed from the scanner glass, but the original document needs to be removed.
Remedy: Remove the original document from the scanner glass and press Start.