Description: Problem finding the Scan-axis encoder reading.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Movement jam. • Possible paper jam. • Mechanical Initiator scan axis measure error. • Check that the Scan-Axis Motor is correctly connected. • Check that the Encoder Sensor is correctly connected. • Remove the Encoder Strip and clean it. • Perform the Scan Axis diagnostic test to troubleshoot the problem further 1. Scan Axis.
Code: 93:YZ
Description: Unable to pressurize the Ink Delivery System.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Perform the Ink Delivery System diagnostic test to further troubleshoot the problem. 7. Ink Delivery System (IDS). • If the problem persists, contact HP support.
Code: 94.1:YZ
Description: Profiling algorithm failed.
Remedy: • Profiling failed due to a different error (not algorithm / data processing). • Perform the Color Sensor (ESP) calibration. You must use glossy paper for this calibration. • If the System Error continues, replace the Carriage PCA refer Carriage PCA. • If the System Error continues, replace the Formatter refer Formatter.
Code: 94:YZ
Description: Color calibration Error.
Remedy: • Profiling failed due to a different error (not algorithm / data processing). • Perform the Color Sensor (ESP) calibration. You must use glossy paper for this calibration. • If the System Error continues, replace the Carriage PCA refer Carriage PCA. • If the System Error continues, replace the Formatter refer Formatter.
Code: 98:YZ
Description: Automatic backup print mode enabled.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Recover the printheads.