Remedy: • Check that the Primer Stepper-Motor Cable is NOT broken or damaged and that the Primer Arm moves freely from side to side. • Replace the Service Station • If the Error Code continues, replace the Main PCA WARNING Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed.
Code: 0D0000
Description: No Media Profiles Available.
Remedy: • Download a media profile for the ink type being used.
Code: 0D0002
Description: Insufficient Memory to Initialize HPGL2/RTL.
Remedy: • The minimum memory required is 96 Mbytes so verify memory installed on the printer using the Statistics menu (refer to the User’s Guide).
Code: 0FXXXX
Description: A Firmware Error has occurred.
Remedy: • Power OFF and ON using the Printer Power Switch. • Report the error to the HP Response Center or the nearest HP Support Office. Have the following information ready: • Model and Serial Number of the printer. • Which firmware revision the printer is using (displayed during Printer initialization when powering ON). • The complete error number. • The Service Configuration Print if possible • The Current configuration sheet. • Which software application the customer is using (name, version, etc.).