Description: The printer’s parallel buffer has overflowed during a busy state.
Remedy: Press GO to resume printing. Note: A loss of data will occur.
Code: 40
Display: 40 BAD SERIAL TRANSMISSION
Description: A serial data error (parity, framing, or line overrun) has occurred while the printer was receiving data.
Remedy: Press GO to resume printing. Note: A loss of data will occur.
Code: 40
Display: 40 EIO X BAD TRANSMISSION
Description: A connection with the card in EIO slot X has been abnormally broken
Remedy: 1 Press GO to resume printing. Note: A loss of data will occur. 2 Check that all cables are connected to the EIO ports and that the EIO board is seated properly. 3 If possible, print to another network printer to verify the network is working properly.
Code: 41.3
Display: 41.3 UNEXPECTED SIZE IN TRAY XX
Description: Media is loaded which is longer or shorter in the feed direction than the size configured for the tray.
Remedy: 1 If the incorrect size was selected, cancel the job or press ? to access help. 2 Press Up and Down o step through the instructions.
Code: 41.5
Display: 41.5 UNEXPECTED TYPE IN TRAY XX
Description: The printer senses a different media type in the media path than configured in the tray.
Remedy: 1 If the incorrect type was selected, cancel the job or press ? to access help. 2 Press Up and Down to step through the instructions.
Code: 41.X
Display: 41.X PRINTER ERROR
Description: A printer error has occurred.
X Description 1 unknown misprint error 2 beam detect misprint error 3 media feed error (size) 4 no VSYNC error 5 media feed error (type) 6 ETB detection error 7 feed delay error 9 noise VSREQ
Remedy: 1 Press GO to continue or press ? for more information. 2 If the message persists, turn the printer off and then back on.