-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Canon imageCLASS D1350
Error Codes List page 10
|
|
- Code: E766-8000
- Description: Digital registration error
Information at digital registration could not be obtained.
- Remedy: 1. Install the Engine Controller firmware. 2. Install the set of the controller firmware. 3. Replace the Engine Controller PCB.
- Code: E766-9000
- Description: Scanner power state error
An error was detected in power state of the Laser Scanner Unit.
- Remedy:
- Code: E766-xxxx
- Description: Firmware error
An error due to the controller software occurred so that print could not be proceeded.
- Remedy: Due to firmware error, the possibility of solving the error by replacing the Main Controller PCB is low. Check the installed engine again.
- Code: E804-0004
- Description: Controller Fan error
Since the startup of the Controller Fan, the Fan was locked for a specified consecutive period of time.
- Remedy: 1. Check power supply to the Controller Fan. 2. Replace the Controller Fan.
- Code: E805-0000
- Description: Main Fan error
The Main Fan was locked for a specified consecutive period of time.
- Remedy: 1. Check the connection of the Main Fan. 2. Replace the Main Fan.
- Code: E808-0000
- Description: Failure detection of Low Voltage Power Supply PCB
Printer detected failure of the Low Voltage Power Supply PCB.
- Remedy: Replace the Engine Controller PCB.