Description: When an image is transferred between the main controller PCB and the DC controller PCB, the DC controller PCB detects a fault in the control information
Causes: The wiring is faulty (short circuit, open circuit). The HDD is faulty. The DC controller PCB is faulty. The main controller PCB is faulty.
Remedy: 1. Wiring Are the connection and cable between the connector J122 on the DC controller PCB and the connector J1015 on the main controller PCB normal? NO: Correct the connection/cable. 2. DC controller PCB, Main controller PCB Try replacing the DC controller PCB. Is the problem corrected? YES: End. NO: Replace the main controller PCB.
Code: E602-0001
Description: A mounting fault of the HDD is detected when the HDD is started up from the BOOT ROM
Causes: The wiring is faulty (short circuit, open circuit). The HDD is faulty. The main controller PCB is faulty.
Remedy: 1. Wiring Are the connection and the cable between connector J1025 of the main controller PCB and the connector J2005 of the HDD normal? NO: Correct the connector/cable. 2. System software Try re-installing the system software. Is the problem corrected? YES: End. 3. HDD, Main controller PCB Try replacing the HDD, and download the system software. Is the problem corrected? YES: End. NO: Replace the main controller PCB.
Code: E602-0002
Description: A data read fault of the HDD is detected when the HDD is started up from the BOOT ROM
Causes: The wiring is faulty (short circuit, open circuit). The HDD is faulty. The main controller PCB is faulty.
Remedy: 1. Wiring Are the connection and the cable between connector J1025 of the main controller PCB and the connector J2005 of the HDD normal? NO: Correct the connector/cable. 2. System software Try re-installing the system software. Is the problem corrected? YES: End. 3. HDD, Main controller PCB Try replacing the HDD, and download the system software. Is the problem corrected? YES: End. NO: Replace the main controller PCB.
Code: E604-0000
Description: A fault is detected in the image memory
Causes: The wiring is faulty (short circuit, open circuit). The HDD is faulty. The main controller PCB is faulty.
Remedy:
Code: E605-0001
Description: A fault is detected in the battery for the image memory
Causes: The wiring is faulty (short circuit, open circuit). The HDD is faulty. The main controller PCB is faulty.
Remedy:
Code: E606-0001
Description: A mounting fault of the HDD is detected when the HDD is started up from the BOOT ROM
Causes: The HDD is faulty. The main controller PCB is faulty.
Remedy: 1. Wiring Are the connection and cable normal between the connector J1025 on the main controller PCB and the connector J2005 of the HDD? NO: Correct the connection and the cable. 2. System software Try re-installing the system software. Is the problem corrected? YES: End. 3. HDD, Main controller PCB Try replacing the HDD and downloading the system software. Is the problem corrected? YES: End. NO: Replace the main controller PCB.