Description: The puncher not leave home position when the puncher shift motor is driven for 1 sec
Causes: The horizontal registration home position sensor (PI2P) is faulty. The puncher shift motor (M2P) is faulty. The puncher drive PCB is faulty
Remedy:
Code: E593-0002
Description: The puncher does not return to home position when the puncher shift motor is driven for 1 sec
Causes: The horizontal registration home position sensor (PI2P) is faulty. The puncher shift motor (M2P) is faulty. The puncher drive PCB is faulty
Remedy:
Code: E5F1-0001
Description: The folding roller does not leave home position when the stapler/folder motor is driven for 1.5 sec
Causes: The folding roller home position sensor (PI12) is faulty. The stapler/folder motor (M7) is faulty. The stapler/folder clock sensor (PI14) is faulty. The finisher controller PCB is faulty.
Remedy:
Code: E5F1-0002
Description: The folding roller does to return to home position when the stapler/folder motor is driven for 3.5 sec or more
Causes: The folding roller home position sensor (PI12) is faulty. The stapler/folder motor (M7) is faulty. The stapler/folder clock sensor (PI14) is faulty. The finisher controller PCB is faulty.
Remedy:
Code: E5F1-0003
Description: The clock is disrupted for 1 sec or more while the stapler/folder motor is driven
Causes: The folding roller home position sensor (PI12) is faulty. The stapler/folder motor (M7) is faulty. The stapler/folder clock sensor (PI14) is faulty. The finisher controller PCB is faulty.
Remedy:
Code: E601-0000
Description: When an image is transferred between the main controller PCB and the HDD, the main controller PCB detects a fault in control information
Causes: The wiring is faulty (short circuit, open circuit). The HDD is faulty. The DC controller PCB is faulty. The main controller PCB is faulty.
Remedy: 1. Wiring Are the connection and the cable between the connector J1017 on the main controller PCB and the connector J1551 on the HDD normal? YES: End. NO: Correct the connection/cable. 2. HDD, Main controller PCB Try replacing the HDD, and download the system software. Is the problem corrected? YES: End. NO: Replace the main controller PCB.