Description: Stationary jam in machine SR5, SR9
- After the registration sensor (SR11) has detected the trailing edge of paper, the delivery sensor (SR5) does not detect the trailing edge of paper within a specific period of time.
Remedy:
Code: 021c
Description: Wound Paper Jam at Fuser SR5, SR11
- The delivery sensor (SR5) has detected absence of paper within the prescribed time after it detected presence of paper.
Remedy:
Code: 1118
Description: Door open jam SR5, SR9, SR11, SW2
- The door was opened when there was printing paper in the transport path.
Remedy:
Code: E000-0000
Description: Startup error
- The temperature detected by the main or sub thermistor does not rise to the specified value during startup control.
Remedy: - Check the fixing film connector. - Replace the fixing film unit. - Replace the DC controller PCB.
Code: E001-0000
Description: Abnormally high temperature (detected by main thermistor)
- The main thermistor detected an abnormally high temperature (235 deg C) during temperature control.
Remedy: - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB.
Code: E001-0001
Description: Abnormally high temperature (detected by sub thermistor)
- The sub thermistor detected an abnormally high temperature (300 deg C) during temperature control.
Remedy: - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB.