Description: Delivery stationary jam SR2002
- In case the internal software signal "Delivery Sensor ON" set in the system cannot be detected, when the paper feed request is received and the paper is fed the prescribed distance, and the leading edge of paper is detected and paper is fed the prescribed distance
Remedy:
Code: 0010
Description: Pickup NG SR2003
- The registration sensor has been held off since paper pickup started.
Remedy:
Code: 0104
Description: Pickup Delay Jam SR11
- After execution of a pickup retry, the registration sensor (SR11) does not detect the leading edge of paper within a specific period of time. Or after the duplex drive solenoid (SL1) is on, the registration sensor (SR11) does not detect the leading edge of paper within a specific period of time.
Remedy:
Code: 010c
Description: Delivery Sensor Delay Jam SR5
- After the registration sensor (SR11) has detected the leading edge of paper, the delivery sensor (SR5) does not detect the leading edge of paper within a specific period of time.
Remedy:
Code: 0208
Description: Pickup Stationary Jam SR11
- After the registration sensor (SR11) has detected the leading edge of paper, the registration sensor (SR11) does not detect the trailing edge of paper within a specific period of time.
Remedy:
Code: 0210
Description: Delivery Sensor Stationary Jam SR5
- The delivery sensor cannot detect absence of paper within the specified time after turning off of the registration clutch. - The delivery sensor cannot detect absence of paper within the specified time after the sensor detected the leading edge of paper.