-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Canon NP6035
Error Codes List page 1
|
|
- Code: E000
- Description: Fuser did not heat up. Lamp, thermal switch, thermistors, connections, AC driver, DC controller, SSR, etc.
- Code: E001
- Description: Fuser temperature too high. Same possibilities as E000, as well as shorted wire.
- Code: E002
- Description: Fuser temperature not rising at correct pace. Same possibilities as E000
- Code: E003
- Description: Fuser temperature drops. Same as E003.
- Code: E004
- Description: Fuser problem. AC driver, SSR bad, wire shorted.
- Code: E010
- Description: Drive problem. Main motor, gears, etc.