Causes: Information on digital registration could not be obtained.
Remedy: 1. Install the Engine Controller firmware. 2. Install the set of Controller firmware. 3. Replace the Engine Controller (UN1).
Code: E766-9000
Description: Scanner power state error
Causes: Error in power state of the Laser Scanner Unit (firmware-dependent).
Remedy: 1. Update the firmware. 2. Replace the Laser Scanner Unit.
Code: E805-0005
Description: Cartridge Fan error
Causes: The Cartridge Fan failed to rotate at the specified revolution.
Remedy: 1. Check the connection of the Cartridge Fan (FM2). 2. Replace the Cartridge Fan (FM2).
Code: E806-0000
Description: Power Supply Fan error
Causes: The Power Supply Fan (power supply) failed to rotate at the specified revolution.
Remedy: 1. Check the connection of the Power Supply Fan. 2. Replace the Power Supply Fan (FM1).
Code: E808-0000
Description: Low voltage power supply failure
Causes: When the printer has detected a low voltage power supply failure.
Remedy: 1. Check the harness/connector between the Engine Controller PCB (UN1) and the Low Voltage Power Supply PCB (UN2). 2. Replace the Low Voltage Power Supply PCB (UN2). 3. Replace the Engine Controller PCB (UN1).
Code: E840-0000
Description: Pressure release mechanism error
Causes: An error in pressure release mechanism of the Fixing Assembly was detected.
Remedy: 1. Check the harness/connector between the Fixing Pressure Release Switch (SW5) and the Engine Controller PCB (UN1). 2. Check the harness/connector between the Fixing Motor (M4) and the Driver PCB (UN11). 3. Check the harness/connector between the Driver PCB (UN11) and the Engine Controller PCB (UN1). 4. Replace the Fixing Pressure Release Switch (SW5). 5. Replace the Fixing Motor (M4). 6. Replace the Fixing Assembly. 7. Replace the Driver PCB (UN11). 8. Replace the Engine Controller PCB (UN1).