Description: A document longer than the specified length was set and scanned.
Remedy: <User Check> • Set the document length within the standard. 1 Dirt on the eject roller Clean the eject roller. 2 Feed belt failure Replace the feed belt. 3 Feed motor failure Replace the feed motor. 4 Main PCB failure Replace the main PCB ASSY.
Code: A200
Description: The first side document scanning position sensor detected that the document length was 90 cm or more while scanning a document.
Remedy: <User Check> • Set the document length within the standard. • Remove the jammed document. 1 First side document scanning position actuator caught in sections of the machine Reattach the first side document scanning position actuator. 2 First side document scanning position sensor failure Replace the first side document scanning position sensor PCB. 3 Main PCB failure Replace the main PCB ASSY.
Code: A300
Description: The document scanning position sensor has not detected the document passing even after the document has been fed for the specified time.
Remedy: <User Check> • Set a document within the specified size in the ADF correctly. • Remove the jammed document. 1 Document scanning position actuator coming off Reattach the document scanning position actuator. 2 Connection failure of the first side document scanning position sensor harness Reconnect the first side document scanning position sensor harness. 3 Document scanning position sensor failure Replace the document scanning position sensor PCB ASSY. 4 Main PCB failure Replace the main PCB ASSY.
Code: A400
Description: The front cover sensor detected an open front cover.
Remedy: <User Check> • Close the front cover correctly. 1 Connection failure of the front cover sensor harness Reconnect the front cover sensor harness. 2 Front cover sensor attachment failure Reattach the front cover sensor. 3 Front cover sensor failure Replace the front cover sensor. 4 Main PCB failure Replace the main PCB ASSY.
Code: A700
Description: Color parameter in the ROM does not match the first side or second side CIS.
Remedy: 1 Old firmware Install the latest version of the firmware. 2 First side or second side CIS unit failure Replace the first side or second side CIS unit. 3 Main PCB failure Replace the main PCB ASSY.
Code: A900
Description: A scanning error occurred while scanning the image.
Remedy: 1 Program malfunction Install the latest version of the firmware. 2 First side or second side CIS unit failure Replace the first side or second side CIS unit. 3 Main PCB failure Replace the main PCB ASSY.