Samsung ProXpress M4560FX
Error Codes List page 2
|
|
- Code: 61-1H51, 61-1H52
- Description: 3rd party application update has failed due to unsigned certificate. Please make sure installation file is valid
- Causes: PAR update has completed with error.
- PAR uses unsigned certificate.
- PAR uses expired certificate.
- PAR uses unverified certificate.
- PAR uses invalid certificate. - Remedy: 1) Get PAR file with signed certificate again.
2) Try PAR update again.
- Code: 61-1H53, 61-1H54
- Description: 3rd party application update has failed due to unsigned certificate. Please make sure installation file is valid
- Causes: PAR update has completed with error.
- PAR uses unsigned certificate.
- PAR uses expired certificate.
- PAR uses unverified certificate.
- PAR uses invalid certificate. - Remedy: 1) Get PAR file with signed certificate again.
2) Try PAR update again.
- Code: 61-1H60
- Description: Android app installation has failed. The app is already installed
- Causes: APK update has completed with error.
- The app is already installed. - Remedy: 1) There is no need for user intervention.
- Code: 61-1H61
- Description: Android app installation has failed due to invalid installation file. Install valid file
- Causes: APK update has completed with error.
- APK file is invalid. - Remedy: 1) Get valid APK file again.
2) Try APK update again.
- Code: 61-1H62
- Description: Android app installation has failed due to invalid installation file. Install valid file
- Causes: APK update has completed with error.
- APK updating has failed due to insufficient storage - Remedy: 1) Make room for APK installation.
2) Remove unused apps.
3) Try APK update again.
- Code: A1-1112, A1-1113
- Description: Motor Failure: #A1-1112. Turn off then on. Call for service if the problem persists
Motor Failure: #A1-1113. Turn off then on. Call for service if the problem persists - Causes: Main(Feed/Fuser) motor operation is abnormal.
• A1–1112 : Main motor is not operated for print-job. • A1–1113 : Main motor is operating but machine recognizes status as "Stopped". - Remedy: 1) Turn the machine off. Check if there are any foreign substances or paper around the paper path.
2) Remove the right cover.
3) Check if the main motor connector is connected correctly.
4) If the connection is OK, turn the machine on. Enter SVC mode. Select the main motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines) Check the motor operation. a) If the motor is not operational, • Check the signal and power with the DVM. • If the checked result is normal, replace the main(feed/fuser) motor. • If the checked result is abnormal, check the following. - If 24V power is not generated, replace the SMPS board. - If the control signal is abnormal, replace the main board. b) If the motor is operational, • Check the Pin No 8. If the value is abnormal, replace the main board. If the value is normal, replace the harness.
5) If the main motor operation is normal, remove the fuser unit. Check if the fuser unit has any problem. Replace the fuser unit.