Samsung ProXpress M4080FX
Error Codes List page 10
|
|
- Code: U3-3113, U3-3313, U3-3314
- Description: Original paper jam in front of the scanner Original paper jam inside the scanner
- Causes: Original jam has occurred on the paper path.
- Remedy: 1) Check if the pick up motor operates normally.
2) Open the DSDF cover. Check if the paper jam is occurred.
3) Remove the jammed paper.
4) Check if there are any obstacles or contamination on the paper path. Remove it.
5) If the problem persists, check the followings. a) Separate the DSDF Unit. b) Check the sensor connection. If the connection is OK, replace the sensor.
6) Push the white bar. Check if it returns in original condition.
7) Close the DSDF unit.
- Code: U3-3413, U3-3513, U3-3514
- Description: Original paper jam in front of the scanner Original paper jam inside the scanner
- Causes: Original jam has occurred on the paper path.
- Remedy: 1) Check if the pick up motor operates normally.
2) Open the DSDF cover. Check if the paper jam is occurred.
3) Remove the jammed paper.
4) Check if there are any obstacles or contamination on the paper path. Remove it.
5) If the problem persists, check the followings. a) Separate the DSDF Unit. b) Check the sensor connection. If the connection is OK, replace the sensor.
6) Push the white bar. Check if it returns in original condition.
7) Close the DSDF unit.
- Code: U3-4110
- Description: Door of scanner is open
- Causes: DSDF cover is open.
- Remedy: 1) Close the DSDF cover properly.
2) If this error occurs continually, check the following: a) Check the DSDF cover open sensor and its harness. If there is a defective part, replace it. b) If both of them are normal, check the Cover-Open Rib. If it is broken, replace the Cover-Open.