Riso RZ200

• Code: F03
• Description: Multi-up printing - Incorrect paper size
• Causes: 016 Tried to make multi-up printing with incorrect paper size.
• Remedy: Press reset key and place correct size papers on the paper feed tray.

• Code: F05
• Description: Print quantiy under Minimum Print Quantity
• Causes: 019 In master making, the print quantity selected is less than the minimum print quantity.
• Remedy: Enter print quantity value over the programmed minimum value.

• Code: F08
• Description: Auto Tray - Paper Size and Original Size does not Match
• Causes: 017 When the Auto-Tray is selected, the original size (scanning ratio) and the printing paper set on the tray(s) did not match.
• Remedy: Press CANCEL button, and check the paper and original size.

• Code: F10
• Description: Master image larger than paper size: 2
• Causes: 021 Paper size does not match with the size of image on the print drum when test print is selected and activated.
• Remedy: Press Cancel key to cancel, or press Proof key to continue.

• Code: F12
• Description: Auto-Tray: Irregular Size Original
• Causes: 024 Irregular size original was used when Auto-Tray was selected.
• Remedy: Press [CANCEL] key

• Code: F15
• Description: Paper size does not match with the paper on the paper receiving tray
• Causes: 042 With the auto-control-paper-receving-tray connected, the paper on the receiving tray is larger than the printing paper.
• Remedy: Press [CANCEL] button