Causes: 540 Cannot access to the EEPROM on the print drum PCB. 542 Print drum PCB EEPROM data error.
Remedy: Pull out print cylinder (drum) from the machine.
Code: D32
Description: AF Cover Not Closed
Causes: 177 The AF cover is opened.
Remedy: Close the AF cover.
Code: E01
Description: Replace battery
Causes: 010 Battery voltage was less than 2.1 V when the power was switched ON (weak battery: time to replace battery).
Remedy: Press Reset Key, and replace the battery.
Code: E02
Description: Maintenance call
Causes: 011 Master counter reached the value set for the maintenance call (value set by test mode). [The message appears when either the power is turned ON, the unit is reset, or when the machine operation ended.] 012 Copy counter reached the value set for the maintenance call (value by set test mode). [The message appears when either the power is turned ON, the unit is reset, or when the machine operation ended.] 022 Maintenance counter inside the print drum reached the value set for the maintenance call (value set by test mode). [The message appears when either the power is turned ON, the unit is reset, or when the machine operation ended.]
Remedy: Press Reset Key, and also reset the maintenance call value setting by test mode.
Code: F01
Description: No master on print cylinder (drum)
Causes: 015 There is no master on the print drum at the start of printing.
Remedy: Make a new master with an original.
Code: F02
Description: Master image larger than paper size: 1
Causes: 018 Paper size does not match with the image size on the print drum at the start of printing. The paper size is smaller than the image size on the master.
Remedy: Press [OK] or [Cancel] button. Also check the paper size.