-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Ricoh SPC342DN
Error Codes List page 1
|
|
- Code: 000
- Description: Cover Open
- Causes: The front or top cover is open.
- Remedy: 1. Close the front or top cover.
2. Replace the interlock switches or actuator mechanism.
- Code: 010 ... 013
- Description: 010 AIO Set Error (Black)
011 AIO Set Error (Magenta)
012 AIO Set Error (Cyan)
013 AIO Set Error (Yellow)
- Causes: • Black AIO not set
• Defective connection of the ID chip terminal on the black AIO
- Remedy: 1. Install the AIO (black, magenta, cyan or yellow).
2. Reinstall or replace the AIO (black, magenta, cyan or yellow).
- Code: 015
- Description: ITB (Image Transfer Belt) Unit Set Error
- Causes: • ITB unit not set
• The machine does not detect any signal from the TM sensors while the ITB contact motor is initializing.
- Remedy: Install the ITB unit.
- Code: 016
- Description: Fusing Unit Set Error
- Causes: • Fusing unit not set
• Disconnected or defective harness of the fusing unit
- Remedy: 1. Install the fusing unit.
2. Check or replace the harness of the fusing unit
3. Replace the fusing unit.
- Code: 070
- Description: Printing Error 1: No Paper
- Causes: • No paper in the tray
- Remedy: Put paper in the tray.
- Code: 071
- Description: Printing Error 2: Paper Size Error
- Causes: • Paper size mismatch between selected paper size and detected paper size
- Remedy: Load correct size paper in the tray or select correct paper size.