Description: Software performance error
The software attempted to perform an unexpected operation. NOTE: When this error occurs, the file name, address, and data will be stored in NVRAM. This information can be checked by using SP7-403. See the data and the situation in which this SC occurs. Then report the data and conditions to your technical control center.
Description: Software continuity error
The software attempted to perform an unexpected operation. However, unlike SC990, the process can keep on running.
Causes: • Logged only; the machine can continue to operate
Code: 992
Description: Other system SCs
The controller received an unknown SC code from the engine.
Causes: • Contact your product specialist.
Code: 997
Description: Application function selection error
The application selected by a key press on the operation panel does not start or ends abnormally.
Causes: • Software defective • An option required by the application (RAM, DIMM, board) is not installed.
Code: 998
Description: Application start error
• After switching the machine on, the application does not start within 60 s. (No applications start or end normally.)
Causes: • Software defective • An option required by the application (RAM, DIMM, board) is not installed.
Code: 999
Description: Program download error
The download (program, print data, language data) from the IC card does not execute normally. Important Notes About SC999 • This SC is not logged, because it operates primarily in the download mode. • If the machine loses power while downloading, or if for some other reason the download does not end normally, this could damage the controller board or the PCB targeted for the download and prevent subsequent downloading. If this problem occurs, the damaged PCB must be replaced.
Causes: • Software defective • An option required by the application (RAM, DIMM, board) is not installed • Board installed incorrectly • BICU defective • Controller defective • IC card defective • NVRAM defective • Loss of power during downloading