OKI CX2731MFP
Error Codes List page 1
|
- Code: 001
- Display: Inspection is required. 001 : Error
- Description: Machine Check Exception
A hardware error was detected (board failure or insufficient power supply capacity). - Remedy: Replace the CU/ PU board.
- Code: 002, 006, 009, 011
- Display: Power OFF/ON 002 : Error 006 : Error 009 : Error 011 : Error
- Description: CPU Exception
- Remedy: Is the error display provided again?
Remove any RAM DIMM and turn off and on the MFP. Replace the CU/ PU board. Reinstall the RAM DIMM.
- Code: 020
- Display: Inspection is required. 020 : Error
- Description: CU ROM Hash Check Error
- Remedy: Is the error display provided again? Yes Turn off and on the MFP. Replace the CU/ PU board.
- Code: 024, 025
- Display: Inspection is required. 024 : Error 025 : Error
- Description: Kanji Font Error
- Remedy:
- Code: 030
- Display: Inspection is required. 030 : Error
- Description: CU RAM Check Error
- Remedy: Is the error display provided again? Yes Turn off and on the MFP. Replace the CU/ PU board.
- Code: 031, 036
- Display: Inspection is required. 031 : Error 036 : Error
- Description: CU optional RAM check error
- Remedy: Is RAM DIMM installed properly? Does the MFP recover by replacing the RAM DIMM?
Reinstall the RAM DIMM. Replace the RAM DIMM. Replace the CU/ PU board.