OKI CX2032

• Code: 918
• Display: Service call 918:Error
• Description: Duplex FANO Alarm Detection
  FAN error inside the Duplex. Is the error issued again
• Remedy: FAN error inside the Duplex. Is the error issued again when the power is turned on again?
  Check to see if the Duplex is properly installed. Check to see if the FAN is properly connected. Replace the FAN.

• Code: 923
• Display: Power off/on 923:Error
• Description: Black Image Drum Lock Error
  The black image drum (K-ID) does not rotate properly. Is the error message issued again
• Remedy: The black image drum (K-ID) does not rotate properly. Is the error message issued again when the power is turned on?
  Check to see if the K-ID is properly installed. Replace the K-ID. Replace the K-ID motor.

• Code: 928
• Display: Service call 928:Error
• Description: Fuser Motor Lock Error
  The fuser does not rotate properly. Is the error message issued again
• Remedy: The fuser unit does not rotate properly. Does the error reoccur after power cycling?
  Check to see if the fuser unit is properly installed. Replace the fuser unit. Replace the fuser motor.

• Code: 980
• Display: Service call 980:Error
• Description: Error by media clinging to the fuser
  Media has clung to the fuser.
• Remedy: Media has clung to the fuser. Power OFF Replace the fuser unit.

• Code: F0C, FFF, F0D
• Display: Power off/on Error codes 203,204, 207, 208, 214, FOC, FFF F0D: Error(C5900) FFE: Error(C5900)
• Description: An error was detected of the CU program.
• Remedy: Reinstall the CU board. Is the error message displayed again? After turn power OFF, check connections between CU board and PU board. Then turn power ON again.