Lexmark C792
Error Codes List page 26
|
|
- Code: 991.00...991.99
- Description: <device> Error The specified device has detected an error.
- Remedy: • POR the printer. • If the error message persists, replace the system board
- Code:
202.33, 202.38
- Description: Bin-full sensor is never made or is made late.
- Remedy: 1 Is the bin-full flag damaged? Replace the bin-full flag. See “Bin-full flag removal”. Go to step 2. 2 Turn the printer off, and open the system board shield. Check the cable in connector JTCVR1 for proper connection to the system board. Is the cable properly connected? Go to step 3. Reseat the cable. 3 Check the cable in connector JTCVR1 for damage. Is the cable damaged? Replace the bin-full and output beacon cable. To access the cable, see “Top cover removal”. Go to step 4. 4 Remove the top cover assembly. See “Top cover removal”. Is the cable properly connected? Go to step 5. Reseat the cable. 5 Replace the bin-full sensor. See “Bin-full sensor removal” Does the error reoccur? Replace the system board. See “System board removal”. Problem solved.