Description: FAX control PWB system error Processing with the fax software was disabled due to a software problem.
Causes: FAX control PWB
Remedy: 1. Turn the main power swtch off and after 5 seconds, re-mount the FAX controller PWB, then turn power on. 2. Reinstall the fax software. 3. Replace the FAX control PWB.
Code: 0060
Description: Mainboad type mismatch
Causes: Engine PWB
Remedy: Replace the engine PWB
Code: 0070
Description: FAX control PWB incompatible detection error Abnormal detection of FAX control PWB incompatibility In the initial communication with the FAX control PWB, any normal communication command is not transmitted.
Causes: FAX control PWB (The FAX PWB installed will not be the one designed for the machine.)
Remedy: 1. Install the FAX system designed for the model. 2. Reinstall the fax software.
Code: 0100
Description: Backup memory device error
Causes: Flash memory (Main PWB)
Remedy: 1. Turn the main power swtch off and after 5 seconds, then turn power on. 2. Replace the main PWB
Code: 0120
Description: MAC address data error For data in which the MAC address is invalid.
Causes: Flash memory (Main PWB)
Remedy: 1. Turn the main power swtch off and after 5 seconds, then turn power on. 2. Check the MAC address on the network status page. 3. If it is blank, obtain the data with its MAC address written from the service support and install. 4. Replace the main PWB
Code: 0130
Description: Backup memory read/write error (main PWB) Mismatch between writing data and reading data successively.
Causes: Main PWB
Remedy: Replace the main PWB and check for correct operation