Description: NVRAM initialization failure
• Total Clear is executed in a mode other than the card line mode. • An initial command is issued from the terminal in a mode other than the card line mode. • A new NVRAM is detected in a mode other than the card line mode.
Remedy: 1 Check the PWB-MFP connector for proper connection and correct as necessary. 2 Change PWB-MFP.
Code: C3F00
Description: Vendor connection failure
• It is detected that communications with the vendor are interrupted for a given period of time or more with "Installed" selected for the setting of vendor installation.
Remedy: 1 Check the Vendor connector for proper connection and correct as necessary. 2 Check the PWB-MC connector for proper connection and correct as necessary. 3 Change PWB-MC.
Code: C3FFC
Description: ROM contents error upon startup (LPH)
• A fault is detected in a sequence of ROM contents check of the LPH Board during starting.
Remedy: 1 Check the ROM version. 2 Rewrite firmware using the Compact Flash card.
Code: C3FFD
Description: ROM contents error upon startup (Scanner)
• A fault is detected in a sequence of ROM contents check of the PWB-C during starting.
Remedy: 1 Check the ROM version. 2 Rewrite firmware using the Compact Flash card.
Code: C3FFE
Description: ROM contents error upon startup (PRT)
• A fault is detected in a sequence of ROM contents check of the Control Board during starting.
Remedy: 1 Check the ROM version. 2 Rewrite firmware using the Compact Flash card.
Code: C3FFF
Description: ROM contents error upon startup (MSC)
• A fault is detected in a sequence of ROM contents check of the MSC (PWB-MFP) during starting
Remedy: 1 Check the ROM version. 2 Rewrite firmware using the Compact Flash card.