0

USD 0.00

Discount 0.0%
Parts List

0

Konica-Minolta Magicolor 2300W

Error Codes List page 3

All About this machine

Error Code:

page

Code: 1A
Description: • If the temperature of the fusing roller when the fusing unit begins warming up does not remain increased by 5°C for 1 second within the 40 to 50 seconds after the fusing roller begins warming up
Remedy: 1 Is there a short circuit at TH1? (between CN18-1 and -2 on the thermistor) YES Clean TH1. HEATER 2-D Replace the fusing unit. NO Replace PU. Replace PWB-AP.

Code: 1B
Description: • If the temperature of the fusing roller when the fusing unit begins warming up does not remain increased by 5°C for 1 second within the 40 to 50 seconds after the fusing roller begins warming up
Remedy: 1 Is there a short circuit at TH1? (between CN18-1 and -2 on the thermistor) YES Clean TH1. HEATER 2-D Replace the fusing unit. NO Replace PU. Replace PWB-AP.

Code: 21
Description: • If a overhead projector transparency is not detected
Remedy: 1 Check PC3A operation. PC3_REM 5-D. 2 Replace PWB-A. 3 Replace PWB-P.

Code: 29
Description: • If the EEPROM malfunctioned
Remedy: 1 Replace the EEPROM. 2 Replace PWB-A.

Code: 2A
Description: • If the EEPROM malfunctioned
Remedy: 1 Replace the EEPROM. 2 Replace PWB-A.

Code: 2B
Description: • If the EEPROM malfunctioned
Remedy: 1 Replace the EEPROM. 2 Replace PWB-A.

	Error Code
	Service Mode, Troubleshooting
	Parts Catalog
	Compatibility
	Downloads Files
	Home

Send message to us