HP Latex 3000

Error Codes List page 56

Error Code:

page

Code: 86.03.02:92
Description: Scan stop triggered by front safety sensor. Reinitialize carriage. If the problem persists, call your support representative.
Causes: Safety element activated
Remedy: Run subsystem diagnostic.

Code: 86.04.00:08
Description: Possible scan-axis jam detected. Check that servicing and substrate paths are completely clean and clear of obstacles and afterwards perform Reinitialize Carriage from IPS. If problem persists run subsystem diagnostics and call your service representative.
Causes: a. Intermittent or sporadic problem b. Obstacle in the carriage path c. Carriage friction too high d. Encoder strip damaged e. Motor or motor PCA damaged
Remedy: 1. Run the scan-axis diagnostics. 2. Ensure that the carriage path is free of obstacles. 3. Perform the scan-axis cleaning process. 4. Check the encoder strip and replace it if it is damaged. See Encoder strip. 5. Replace the motor.

	Error Code
	Service Mode, Troubleshooting
	Parts Catalog
	Compatibility
	Downloads Files
	Home