PrintCopy.info service

HP LaserJet P3005

Error Codes List page 10

  • Code: 68.X
  • Display: 68.X STORAGE ERROR SETTINGS CHANGED
  • Description: A non-volatile storage device is full. Press "OK" to clear the message. Printing can continue, but unexpected behavior could result. X Description 0 Onboard NVRAM
  • Remedy: 1. Press "OK" to continue. 2. Turn the device off and then on. 3. Perform an NVRAM initialization. 4. If the message persists, replace the formatter.
  • Code: 79.XXXX
  • Display: 79.XXXX
  • Description: A critical hardware error has occurred.
  • Remedy: 1. Turn the device off and then on. 2. If the message persists, contact HP support.
  • Code: 8X.XXXX
  • Display: 8X.YYYY EIO ERROR
  • Description: The EIO accessory card has encountered a critical error.
  • Remedy: 1. Turn the device off and then on. 2. Upgrade the Jetdirect firmware. 3. Try to determine whether the error occurs intermittently, while printing, or when turning on the device. 4. If the error appears while printing, determine whether it occurs when printing from a specific computer, a specific application, or a specific file. If all other computers, applications, or files can print without the error, then the problem may be only within one print job or computer. Make sure the computer has the most current printer drivers, or use a generic printer driver. 5. If the error occurs when the device is first turned on, turn off the device, disconnect the LAN cable, and then turn on the device. This process will determine if errors occur from the network connection. If errors do not appear when the LAN cable is unplugged, it is possible traffic or signal on the network might be causing the error. Make sure to try all solutions suggested, especially upgrading the Jetdirect firmware. 6. Disable the print server. ?? For EIO print servers, remove the card. ?? For embedded print servers, use the SERVICE menu. 7. If the problem persists, contact HP Support.
  • Code: 8X.XXXX
  • Display: 8X.YYYY EMBEDDED JETDIRECT ERROR
  • Description: The HP Jetdirect embedded print server has encountered a critical error.
  • Remedy: 1. Turn the device off and then on. 2. Update the Jetdirect firmware. 3. If the problem persists, contact HP Support.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us