Description: Attention state
In the Attention state, the ATTENTION light is blinking and the GO and READY lights are off. The following conditions create the attention state:
- A tray is empty.
- A door is open.
- The print cartridge is missing.
- A jam exists, or a tray has misfeed.
Press the GO button to attempt to reset the printer after a jam is cleared. Pressing the GO button has no effect in the other error cases. You might need to clear the error manually and then press the GO button or close the top cover. If the error persists, the printer will return to the attention state.
Code: 08
Display: Go: ON
Ready: ON
Attention: ON
Description: Fatal error
All three LEDs are on continuously in the fatal-error state. Press the GO button to see the secondary error information for the fatal error. When you release the button the printer returns to the initial Fatal-error state.
1 If the ATTENTION light illuminates as the secondary error pattern, the formatter and engine are not communicating.
- Check the ribbon cable between the formatter and ECU, and check all other connections.
- If the error persists, replace the ECU.
- If the error persists, replace the printer.
2 If the GO and READY lights illuminate as the secondary error pattern, the fuser (fixing assembly) has failed and must be replaced